Valkyrie Syn 360 AIO Liquid Cooler Review: A strong AIO marred by beta-level software

[Author 0]

Valkyrie Syn 360 AIO Liquid Cooler Review: A strong AIO marred by beta-level software

Valkyrie Syn 360 AIO Liquid Cooler Review: A strong AIO marred by beta-level software

The SYN AIO from MyValkyrie features what might be the fanciest packaging I’ve seen for a cooling product, plus upgradable storage via an SD Card, and is available in both 240mm and 360mm models. Does the 360mm version of Valkyrie’s SYN AIO have what it takes to make our list of best AIO coolers? We’ll have to put it through testing to be sure, but first here are the specifications from My Valkyrie.

Cooler specifications 

Swipe to scroll horizontally

Cooler	Valkyrie Syn 360
MSRP	$209.99 USD
Heatsink Material	Aluminum
Rated Lifespan	Unlisted
Socket Compatibility	Intel Socket LGA 1851/1700/1200/115x AMD AM5 / AM4
Base	Copper
Max TDP (Our Testing)	~260W with Intel’s i7-13700K
Installed Size (with fans)	276mm (L) x 52 mm (W) x 120mm (D)
Warranty	5 years

Packing and included contents 

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

The packaging of the AIO is rather different from most coolers. It feels like luxury product packaging. The individual parts are protected by molded foam, carboard, and plastic coverings. On the side of the unit, a removable keychain is attached which can be used to open the drawers. The fans are contained in a second drawer below the main parts.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

Included with the cooler are the following: 

• 360mm radiator and CPU block
• Pre-installed 32GB SD Card
• Three 120mm fans
• Hardware Fan and ARGB hub
• Valkyrie thermal paste and pre-installed thermal paste
• Bushing tool
• Mounting for AMD and Intel platforms

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

Features of Valkyrie’s SYN 360 

*⃣ Included PWM and ARGB Hub

A transparent PWM and ARGB hub is included, which supports up to six devices. 

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ Full RAM compatibility

As this AIO does not interfere or overhang DIMM slots in any manner, all sizes of RAM, no matter how tall, are compatible with the SYN 360

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ 2.1-inch LCD display, MythCool software

Valkyrie’s SYN features a 2.1-inch round display, which can be customized with a custom background, GIF, or video file via the MythCool software. You can also control the software using a mobile phone, if you prefer. I’ll go over a few more details about the software in the next section of the review.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ 27mm thick radiator

The radiator included is a standard 27mm size, for a total of 52mm in thickness if you include the fans attached.

*⃣ Rotatable, braided tubing

The braided tubing of the AIO is fully rotatable, which can help make installation easier. 

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ Extra thermal paste

Most companies either have pre-applied thermal paste for their coolers, or include a small tube of thermal paste for the user to apply. MyValkyrie goes the extra mile and does both – pre-applying paste to the CPU block, and also including an extra tube for future use.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ Upgradeable storage

Valkyrie’s SYN AIOs include a removable 32GB SD card for storing custom animations and videos.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ Cable management features

Included are cable management clips and velcro straps, which can help keep the tubing of the AIO organized.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

*⃣ 3x Valkyrie X12 fans

There’s more to a cooler than just the heatsink or radiator. The bundled fans have a significant impact on cooling and noise levels, as well as how the cooler looks in your case. 

Valkyrie includes its X12 120mm fans with the AIO. These fans feature 9 blades, rubber anti-vibration pads, and incorporate ARGB strips for decorative lighting.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

Swipe to scroll horizontally

Model	Valkyrie X12
Dimensions	120 x 120 x 25mm
Fan Speed	800-2150 RPM ± 10%
Air Flow	Up to 80 CFM
Air Pressure	Up to 3.14 mmH2O
Bearing Type	FDB
Lighting	ARGB

What I don’t like about the SYN 360 

High Price

The price of this AIO is higher than competing 360mm AIOs. Part of this can be explained by the inclusion of the LCD screen and included PWM hub, but $209.99 is still hard to accept because of the next point.

“Beta” level software

The software is very rough around the edges and feels clunky and rushed. Some parts have not been translated into English yet and display in Mandarin.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

The software also only includes one background for the display. No other visuals are available, unless you upload a custom image or video file.  

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

Testing Methodology, and how my testing differs vs the competition

I do a few things differently than many other reviewers, to ensure my results are actually applicable to most users. I test in an actual case, rather than an open bench. The problem with testing on an open bench is that with typical consumer usage – you know, with an enclosed computer case – the ambient temperature within the case will be higher than that of outside air, which adds difficulty to the cooler’s job. 

I also strictly regulate the ambient temperature to 23 degrees C during testing. I do not accept results at 22 or 24 C as valid, even though in theory there wouldn’t be a significant difference in terms of test results.

Testing is also only performed with recent-generation CPUs. Older CPUs have bigger hotspots due to older manufacturing processes, and they also have lower clock speeds, which can make them easier to cool.

Many other reviewers, and also most of my own older reviews, only test coolers with a load running on the CPU. While this does provide good and useful information, it doesn’t paint a complete picture of how a cooler will perform. Many workloads, and especially gaming, will stress both the CPU and GPU.

To test how well a CPU’s cooler will perform in these situations I’ve added two tests: one with a light CPU and one with a moderate CPU load, both while running a full load on with AMD’s Radeon RX 7900GRE.

Today’s highest-end CPUs, whether Intel or AMD, are difficult to cool in intensive workloads. In the past. reaching 95 degrees Celsius or more on a desktop CPU might have been a cause for concern. But with today’s top-end CPUs, this is considered normal operation. Similar behavior has been present in laptops for years due to cooling limitations in tight spaces.

All testing is performed with a 23 C ambient room temperature. Multiple thermal tests are run on each CPU to test the cooler in a variety of conditions, and acoustic measurements are taken with each result. These tests include:

1. Noise-normalized testing at low noise levels

2. Out-of-the-box / Default configuration thermal and acoustic testing

a. No power limits enforced

b. Because CPUs hit TJ Max in this scenario, the best way to compare cooling strength is by recording the total CPU package power consumption. 

3. Thermal and acoustic testing in power-limited scenarios

a. Power limited to 175W to emulate a medium-intensity workload

b. Power limited to 125W to emulate a low-intensity workload

The thermal results included are for 10-minute testing runs. To be sure that was sufficiently long to tax the cooler, we tested both Thermalright’s Assassin X 120 R SE and DeepCool’s LT720 with a 30-minute Cinebench test with Intel’s i9-13900K for both 10 minutes and 30 minutes. The results didn’t change much at all with the longer test: The average clock speeds maintained dropped by 29 MHz on DeepCool’s LT720 and 31 MHz on Thermalright’s Assassin X 120 R SE. That’s a small 0.6% difference in clock speeds maintained, a margin of error difference that tells us that the 10-minute tests are indeed long enough to properly test the coolers.

Testing configuration – Intel LGA1700 platform

Swipe to scroll horizontally

CPU	Intel Core i7-14700K
Motherboard	MSI Z790 Project Zero
Case	MSI Pano 100L PZ
Monitor	LG 45GR95QE
PSU	Silverstone HELA 1300

There are many factors other than the CPU cooler that can influence your cooling performance, including the case you use and the fans installed in it. A system’s motherboard can also influence this, especially if it suffers from bending, which results in poor cooler contact with the CPU.

In order to prevent bending from impacting our cooling results, we’ve installed Thermalright’s LGA 1700 contact frame into our testing rig. If your motherboard is affected by bending, your thermal results will be worse than those shown below. Not all motherboards are affected equally by this issue. I tested Raptor Lake CPUs in two motherboards. And while one of them showed significant thermal improvements after installing Thermalright’s LGA1700 contact frame, the other motherboard showed no difference in temperatures whatsoever! Check out our review of the contact frame for more information.

Installation

The cooler installation is simple and easy. The fans come pre-installed, saving a few moments of installation time. I generally recommend securing the radiator to the case before proceeding to other steps.

1. Place the CPU bracket against the rear of the motherboard, and secure it using the included standoffs.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

2. With the first installation of the cooler, you won’t need to apply thermal paste – it’s already on the copper contact plate. However, additional paste is included for other installations. If you’re not sure how to apply thermal paste, we have a guide you can read for more details.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

3. Attach the mounting bars, and secure it using the included thumbscrews.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

4. After securing the CPU block, you’ll need to connect the pump to a USB header using the included cable. You’ll also need to connect the power cord to the CPU block and a SATA power port. Finally, connect the ARGB and PWM cables to finish installation.

data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///ywAAAAAAQABAAACAUwAOw==

(Image credit: Tom’s Hardware)

Source link

#Valkyrie #Syn #AIO #Liquid #Cooler #Review #strong #AIO #marred #betalevel #software

Pelican News

Source Link